Linksys WET54G v3.0 Ethernet Bridge Driver (2019)


Download Now
Linksys WET54G v3.0 Ethernet Bridge Driver

I purchased 2 Linksys WET54G Wireless-G Ethernet Bridges with the intention Getting to the "Looking for Games" screen in Halo. You may some day encounter a situation in which you will require a wireless internet connection for a desktop computer. Perhaps you have decided to move. The Linksys WET54G Wireless-G Ethernet Bridge has a built-in web-based setup Step 3: Under the Wireless section, enter the SSID of your router. Step 4.


Linksys WET54G v3.0 Ethernet Bridge Drivers for Windows 10

Type: Driver
Rating:
4.41
135 (4.41)
Downloads: 595
File Size: 11.55Mb
Supported systems: Windows XP (32/64-bit), Windows Vista, Windows 7, Windows 8.1, Windows 10
Price: Free* [*Free Registration Required]

Download Now
Linksys WET54G v3.0 Ethernet Bridge Driver

Before you go out and buy a wireless network card or attempt to run wire through your attic, you might be able to save yourself time and money if you have an old wireless router lying around.

Linksys WET54G v3.0 Ethernet Bridge Driver

You may be able to upgrade your old router with a different firmware that will allow it to act as a wireless bridge. That is, turn your old router into wireless bridge. A wireless bridge allows you to connect one network to another over the airwaves, rather than having to run wire from one room to another.

Requirements Two wireless routers: One connected to your broadband internet connection to serve as the access point. One connected to other machine s that need to connect to web.

Linksys WET54G v3.0 Ethernet Bridge Windows 8

The Initial Setup Make sure your main internet router is working properly. Verify the wireless connection is working properly by connecting a laptop or some other device. Set up the remote computer at the remote location.

Just plug it into one of the ports on the hub i. The default gateway will be listed there. The twist Linksys WET54G v3.0 Ethernet Bridge is that the ethernet is initially used to connect the wireless print server to the router for configuration, can't configure it wirelessly if you are initially on a encrypted network. Now instead of using that ethernet port as a way to connect the print server to the network via the routerI want to use the ethernet port as a way to connect another computer to the network, in effect bridging into the router via the print server, while still sharing the printer attached via USB through the print server.

  • ShieldSquare reCAPTCHA Page
  • How to upgrade firmware on linksys wet54g ver - Wireless Networking
  • Step by step guide to setup a WRT54G in client bridge mode
  • Suspicious Activity Detected
  • How to upgrade firmware on linksys wet54g ver 3.1
  • Shop by category
  • Step by step guide to setup a WRT54G in client bridge mode

Once you have everything working, you can undo these settings one by one as long as your setup keeps working. Theoratically speaking, you shouldn't need to because your internal network is protected by the firewall of your ROUTER from the internet anyway.

But if you are security conscious then you may want to undo these. You should also be able to ping the internet, e. In fact, the best thing to do right now is to temporarily turn off MAC address filtering.

In order to fix that, you need to setup a static route to the Client setup Step 3, 3 above 9. Click Save Settings button Click on Show Routig Table button and it should look something like: If you have followed the steps correctly and made sensible Linksys WET54G v3.0 Ethernet Bridge for your specific environment, everything should work flawlessly.

Related Drivers